Polar FIS Customizable Engine Data Display – For MQB Models

WARNING:?Please flip away from active Polar FIS screen or turn off when doing any sort of ECU flash or engine scanning (VCDS). They both use the same CANBUS System and Polar FIS can interfere with the process.

MQB Polar FIS for Golf and Golf Sportwagen Only

We are excited to announce that PolarFIS?is ready for MQB platform! Fully customizable gauges and up to 5 Screens over 40 Parameters! This is the cleanest gauge system on the planet for your Mk7 MQB

Now works with Mk7.5! including virtual cockpit!

Installation:

• Remove all three panels under the steering wheel and side panel.
• Gateway unit plug-in is directly above and to the left?the brake pedal?
• Insert polarfis in-between the gateway standalone unit?and can-bus cable

Quick Start Guide after install:

1. scroll to audio screen on your steering wheel
2. Hold OK on phone screen
3. Press ok on Visualization
4. Press ok on Parameters
5. Press ok on Screen 1
6. Press ok on Parameters and start choosing the one you want for screen 1 up to 4 parameters per screen and continues to screen 2 and so forth.

Note: to adjust units/measurements (PSI. Fahrenheit. Milligrams. MPH etc) after holding down ok go to visualization and scroll to advanced. Click advanced and your measurement/units can be adjusted.